Metz 55TH34 VT User Manual

Page 29

Switching on and off

Presetting stations

Switching on

If the TV set is cold and is placed in a warm room, wait
for any condensation on the screen to evaporate before
switching the set on.

Switch the TV set on by pressing the main switch.

The TV set is now in standby mode, indicated by a red light.
Single-digit programme positions can be selected with the numeri-
cal keys

ቢ ባ ቤ . . . or with the keys P̅ or P̃ on the remote

control or with the - P + keys on the TV set

When the TV set is on, two-digit programme positions can be selec-
ted by pressing the preselection key for two-digit input, followed by
the numerical keys.

Switching off

Pressing the OFF key on the remote control switches the TV set to
standby mode. Pressing the main switch on the TV set switches the
set off completely.

Stations can be preset in three different ways:

1. A.P.S. function

Automatic Programme Selection.
This function is executed automatically for the first time when
the TV set is installed and switched on.

2. Station search
3. Direct channel input

1. A.P.S. function

When the TV set is switched on for the first time, the following mes-
sage is displayed on the screen in terrestrial mode:

This function can be cancelled by pressing the

key.

The A.P.S. function is started by pressing the

୴ key.

The TV set now searches the entire terrestrial reception range (recei-
ved with an antenna or from cable) for stations.

After the search has been completed, the station table is displayed
on the screen. This could, for example, look like this:

In some cases, the station logos may not be recognised during the
station search. In this case, you can enter the station a logo as
described on page 34.

The various programme positions in the station table can be selec-
ted with the cursor keys.

You can then do the following with the selected
programme position:

SELECT =

pressing the red key selects this programme position

INSERT =

the programme position selected with the red key

can be inserted in another position in the table

DELETE =

deletes the programme position

AUTOSTORE = calls the A.P.S. function (not possible for satellite

stations)

• Close the menu by pressing the

key.

2. Station search

We recommend using the station search function in order to find a
single station in terrestrial or satellite mode.

• Press the BLUE key to select the menu „INSTALL“.

• Select „TUNING“ with the keys P

̅/P̃.

• Press the key

୴ to open the menu „TUNING“.

• Select „SEARCH“ by pressing the P

̃ key.

• Start the search by pressing the

୵ / ୴ key.

When a station is found, the search stops. The TV set is tuned to
the centre of the related channel. If the picture is still not clear,
you can use the fine tuning function to improve it.

• Select „STORE“ by pressing the P

̃ key and confirm the operati-

on by pressing the

୴ key.

• Close the menu by pressing the

key.

T V

A.P.S.

PLEASE, CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM

START

CANCEL

PROGRAMM

00 ----
01 ARD
02 ZDF
03 BR 3
04 RTL
05 RTL2
06 SAT1
07 PRO7
08 NDR
09 MDR

10 C-16
11 C-52
12 S-01
13 S-06
14 S-16
15 ----
16 ----
17 ----
18 ----
19 ----

20 ----
21 ----
22 ----
23 ----
24 ----
25 ----
26 ----
27 ----
28 ----
29 ----

SELECT

DELETE

AUTOSTORE

INSERT

This manual is related to the following products:

55TH35 - VT