Miele G 2432 - Manual (Page 36)

Problems water intake/drain
Problem Possible fault Solution
The "Intake / Drain"
indicator is flashing. The water supply is
shut off. Open the water supply all the
way.
The dishwasher
stops.
The "Intake / Drain"
indicator flashes.
The time display
shows FXX. Before fixing the fault:
– Turn the dishwasher off "
s".
Fault F12/F13: Water
intake fault. – Open the water supply all the
way.
– Clean the water intake filter,
see "User Maintenance
Instructions".
– The water pressure at the
water connection is lower than
4.35 psi. Consult a plumber.
Fault F11: Water drain
fault. There may be
water in the wash
cabinet. – Clean the triple filter.
– Clean the drain pump and the
non-return valve.
See "User Maintenance
Instructions".
– Remove any kinks in the drain
hose.
Frequently asked questions
36