Master Bilt FIP-40 SERIES - Manual (Page 2)

NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity.
All specifications subject to change without notice.
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
FIP-40 SERIES
ICE CREAM AND NOVELTY DISPLAY MERCHANDISER
TECHNICAL SPECIFICATIONS
LISTINGS HOOKUP
BID SPECIFICATIONS
Item no. FIP-40
Provide_______________( )
Low Temp Ice Cream and Novelty Display
Merchandiser(s), Master-Bilt model no. FIP-40.
Merchandiser to be provided with an elec-
tronically controlled monitoring system.
Construction features include textured
finish on interior and exterior, stainless steel
top serving deck, extra large non-fogging
front display window, four panes of tem-
pered front glass, backlit sign in stainless
steel frame, adjustable heavy-duty, white
1227-3/13-web
©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
Via plug in, 9 foot long, flexible 3
wire 14/3 cord with molded plug.
Twenty amp service is required.
PLAN VIEW
epoxy-coated welded wire shelves, and a
full length fluorescent lamp. Standard lev-
eling legs provided to correct for unlevel
flooring situations.
Merchandiser to also have automatic
condensate evaporator and independent
on/off light switch. Cabinet to be foamed-
in-place with “zero ODP” urethane in-
sulation and to have a sparkling white
polyester enamel interior and exterior.
The doors are to be self-closing and have
magnetic door gaskets. Rear doors are to be
foamed-in-place.
The refrigeration system is to have a self-
contained, hermetic condensing unit using
R-404A refrigerant. Refrigeration system will
also contain a low maintenance bare tube
condenser coil. The temperature range is to
be 0° to -20°F (-18° to -29°C).
Merchandiser to have standard limited
two year parts and labor with additional
three year coverage on compressor part.
Merchandiser to be UL, C-UL and UL EPH
listed.
NEMA 5-20P
NON-REMOVABLE LENS DIMENSIONS
SIDE VIEW ELEVATION VIEW
MODEL
DIMENSIONS
(in.)
DIMENSIONS
(mm)
VOLTS AMPS
UNIT
H.P.
NO. OF
SHELVES
STANDARD
SHELF
SIZE
(in inches)
DISPLAY
AREA
SQ. FT.
CAP.
CU. FT.
SHIP
CU. FT.
SHIP
WT.
(LB/KG) L D H L D H
FIP-40 40 31 50 3 /
16
1016 787 1270 115 13.6 3/4 2 19 x 35 1 /
4
7.5 11.8 46.4 427/194