Miele G892SC - Manual (Page 16)

23 - 70 gr/gal:
^ Press the program seletion button %
(19) until the "Rinse" (16) indicator
flashes.
This is the second program level.
^ Use the program selection buttons
(19) to select the program which
corresponds to the water hardness in
your area.
Table 2
gr/gal ppm Program indicator
23 - 35 410 - 630 Pots & Pans
36 - 70 650 - 1260 Sani Wash
The selected program indicator (14)
and the "Rinse" (16) indicator will flash.
To store the programmed water
hardness:
^ Press the "Start/Stop" button (17)
twice.
^ Turn off the dishwasher.
Checking the programmed water
hardness
^ Make sure the dishwasher is turned
off.
^ Press and hold the "Start/Stop" button
(17) and at the same time turn on the
dishwasher with the "On/Off" button
(13). Release the "Start/Stop" button
within two seconds.
The programmed water hardness will
be indicated by:
1 - 22 gr/gal
Lit program indicator (see table1).
Lit "Rinse" (16) indicator.
23 - 70 gr/gal
Lit program indicator (see table 2).
Flashing "Rinse" (16) indicator.
^ Turn off the dishwasher.
Before using for the first time
16