Philips Magnavox 42MF231D/331D - Manual (Page 28)

28
Connect Accessory Devices
Recorder (VCR-DVD+RW)
Note: Do not place your recorder too close to the TV screen. Some
recorders may be susceptible for signals from the display. Keep recorders
a minimum distance of 20” from the screen.
There is a wide range of audio and video devices that can be connected to your TV.The following
connection diagrams show you how to connect them to the TV.
AV1 YPbPr, VIDEO and L/R Audio,
AV2 YPbPr, VIDEO and L/R Audio,
AV3 VIDEO, S-VIDEO, L/R Audio and Digital Audio out (SPDIF OUT)
SIDE VIDEO, S-VIDEO and L/R Audio, Headphone
SPEAKERS
HDMI
75
Don’t insert any cable here. This area is for repair center use only.
Connect the RF Antenna or Cable TV cable (eventually through
an optional two-way signal splitter and/or Cable TV converter
box) to the RF IN socket of your
recorder.
Connect another RF cable from the output
OUT of your
recorder to the TV’s CABLE/ANTENNA 75 jack.
For better playback quality for stereo device only, also connect
the Video, Audio Left and Right (only for stereo devices) AV
cables to the
VIDEO, AUDIO L and R input jacks of AV3.
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable to the
S-VIDEO input instead of connecting the recorder to the
VIDEO jack of AV3. S-Video does not provide audio, so audio
cables must still be connected to provide sound.
OUT
A V 3:
L + R + V I D E O
HDMI
Pb Y Pr
VIDEO R L
Y Pb Pr
VIDEO R L
S-VIDEO
R
L
3
C A B L E
IN OUT
2
A N T E N N A
1
2
3
HDMI S-VIDEO
R
L
Y Pb Pr
VIDEO R L
Y Pb Pr
VIDEO R L
AC IN
L
R
S-VIDEO
VIDEO