Melissa 645-093/94 - Manual (Page 19)

8 9 8 9
KEY
. Water reservoir cover
2. Water reservoir
. Water level gauge (on glass pot)
4. Filter holder
5. Handle
6. Anti-drip valve
7. Hotplate (beneath glass pot)
8. Control panel with display and
buttons
9. Glass pot (with lid)
0. Water level gauge (on reservoir)
. Power cable and plug
2. Measuring spoon (not visible on
picture)
a. Start/stop button
b. "AUTO" button (timer function)
c. "PRO" button (timer)
d. Timer indicator
e. "MIN" button (minutes)
f. Display
g. "HR" button (timer)
h. Start/stop button
PRIOR TO FIRST USE
• Read the safety instructions
through carefully.
• Ensure that the cord is fully
extended.
• Clean glass pot (9) in soapy water.
• To rinse the appliance through,
pass a potful of water through the
machine before using it for the first
time.
o Follow the instructions in
"Operating the appliance", but
WITHOUT using a filter or coffee.
SETTING THE TIMER AND START
TIME
The appliance has a built-in timer. You
can use this to set the appliance to
start at a given time (see "Operating
the appliance").
NOTE: The timer will require resetting
each time the appliance has been
disconnected from the mains. Reset
the time when reconnecting the
appliance.
Setting the clock
• Place the plug () in the socket.
The clock on the display (f) will
show "12:00" and flash.
• Press the "PRO" button (c) once.
The display will show "SET TIME"
in the top left corner.
• You can now set the time using the
HR (g) button for hours and MIN (e)
button for minutes.
• Setting will stop automatically
when you have not pressed any
button for approx. 8 seconds. The
clock has now been set.
Setting start time
• Press the "PRO" button twice. The
display will show "SET TIMER" in
the top right corner.
• You can now set the start time
using the HR (g) button for hours
and MIN (e) button for minutes.
• Setting will stop automatically
when you have not pressed any
button for approx. 8 seconds. The
start time has now been set.
OPERATING THE APPLIANCE
Regardless of whether you want
to make coffee with or without the
time, the start procedure is always as
follows:
• Pour fresh water into the glass pot.
• Lift the cover () of the water
reservoir, and carefully pour the
water from the glass pot into the
reservoir (2).
• Close the pot lid, and place it
on the hot plate (7). Check it
is correctly positioned, so that
the anti-drip valve (6) is pressed
upwards and is opened.
• Open the filter holder (4) using the
handle (5).
• Place a coffee filter (size 1 x 4) in
the filter holder and fill with coffee.
• Close the reservoir and filter
holder.