Mercedes-Benz 2003 M-Class - Manual (Page 175)

175
Controls in detail
Useful features
Stop watch
̈ Press MODE 2 ( ୴ page 172) repeated-
ly until the stop watch display appears
in the trip computer display 3.
Counting
̈ Press RESET 1 ( ୴ page 172) to start
counting.
Stopping
̈ Press RESET 1 again to stop counting.
Resetting
̈ Press and hold RESET 1 until the dis-
play shows “0:00”.
Average fuel consumption
̈ Press MODE 2 ( ୴ page 172) repeated-
ly until the average fuel consumption
display appears in the trip computer
display 3.
Distance remaining with fuel presently
in tank
̈ Press MODE 2 ( ୴ page 172) repeated-
ly until the distance remaining display
appears in the trip computer display 3.
i
If CAL remains in the display, calibration
was not successfully completed. You
have to recalibrate:
ț Remove the key from the steering
lock.
ț Start the vehicle and start the cali-
bration procedure described be-
fore.
We recommend that you have the com-
pass calibrated at a Mercedes-Benz
Light Truck Center.
i
When the fuel supply drops to reserve
level the display flashes distance re-
maining.
ț USA only:
The display alternates between
FUEL and distance remaining until
supply is consistently below the re-
serve level. When the fuel supply is
very low [approximately 1.5 gal
(5.5 l)]
FUEL is displayed
continuously.