Memorex TravelDrive USB 2.0 - Manual (Page 3)

V. Getting Started:
Check your Operating System (OS):
• For Windows ® Me, Windows ® 2000 & Windows ® XP
There is no need to install any software or drivers! Go straight to section VII.
Using Your TravelDrive™ below and follow the instructions to begin using
your TravelDrive™.
• For Windows ® 98SE
You will need to install a driver for the computer to recognize the TravelDrive™.
See section VI. Windows
® 98SE Driver Installation below.
• For Windows ® NT
NT does not support USB. The TravelDrive™ is not supported in this OS.
• For Windows ® 98 or older
Windows ® operating systems prior to Windows ® 98SE do not have adequate
USB support, and therefore the TravelDrive™ is not supported with those
operating systems. TravelDrives are not useable in PC's running Windows 98
or older operating systems.
VI. Windows ® 98SE Driver Installation:
(Internet Access Required)
If your computer uses Windows ® 98 SE as its operating system, you must install a
driver for your Memorex ® TravelDrive™. The driver required is available for down-
load if you have Internet access. The required file is titled "USB TravelDrive™
Version C Driver" and is located on the Memorex website at
www.memorex.com/service_support/software.php. Follow the steps below to
download and install the Version C driver:
NOTE: Do not insert your TravelDrive™ into your USB port until steps 1 through 12
below have been completed successfully.
1. Turn on your computer and wait for the Windows ® desktop to appear.
2. Close any applications you may have running.
3. Download the necessary driver by launching your Internet browser and insert
the following web address located on the Memorex website:
www.memorex.com/service_support/software.php.
• Select SOFTWARE DOWNLOADS , then USB TRAVELDRIVES .
• Click on DOWNLOAD under TravelDrive Driver C. Read the license
agreement and if you agree to the terms, click on I AGREE AND WISH TO
PROCEED WITH THE DOWNLOAD .
• When the download dialogue box appears, click on SAVE .