Meade Instruments 114EQ-AR - Manual (Page 21)

image will move across the eyepiece field.
Choose one of the 3 primary mirror tilt
screws and slightly move the shadow to
the center of the disk. Then slightly move
the telescope using the flexible cable
controls to center the star disk image in
the center of the eyepiece.
• If any further adjustments are necessary,
repeat this process as many times as
needed until the out-of-focus star disk
appears as in Fig. 17C, when the star
disk image is in the center of the
eyepiece field.
• With the star testing of the collimation
complete, tighten the 3 hex-head primary
mirror locking screws (2, Fig. 13)
OPTIONAL ACCESSORIES
Additional Eyepieces (1.25" barrel
diameter): For higher or lower
magnifications with the telescopes that
accommodate 1.25" eyepieces, Meade Series
4000 Super Plössl eyepieces, available in a
wide variety of sizes, provide a high level of
image resolution and color correction at an
economical price. Contact your Meade
Dealer or see the Meade catalog for more
information. Visit us on the web at
www.meade.com.
19
Meade114EQAR 3/28/07 9:52 AM Page 21