Miller Arrow 25 - Manual (Page 9)

Operating Instructions
4. Pan / Tilt Drag Control.
The Arrow 25 Fluid Head offers 5 selectable positions of
fluid drag + zero setting in the Pan and Tilt. The settings are
equally stepped from light drag in position 1 up to heavy drag
in position 5, the drag plates are completely disengaged in
position zero.
◗ Do not Pan or Tilt the Fluid Head whilst adjusting PAN or TILT
DRAG CONTROL or whilst the PAN & TIL DRAG CONTROL
is between settings.
◗ The drag setting can be changed at any tilt or pan angle.
5. Pan/Tilt Lock Control.
The Arrow 25 Fluid Head offers high capacity calliper disc
brake system to hold the Fluid Head in a fixed pan and/or tilt
position. Camera position will not change when applying or
releasing the Pan/Tilt locks.
◗ Do not pan or tilt the Fluid Head whilst the PAN or the TILT
LOCK is partially applied.
6. Illumination.
The Arrow 25 Fluid Head offers illumination of the PAN &
TILT DRAG CONTROL settings, BUBBLE LEVEL and PAN &
TILT INDICATOR when the low ambient light conditions exist.
Illumination can be achieved by pressing the ILLUMINATION
BUTTON once. The light will switch off after 10 seconds.
Illumination Button Counter Balance Selector Tilt Drag Setting
Pan Drag Setting
Tilt Indicator Bubble Level Tilt Drag Knob Pan Drag Knob
Pan Indicator Fig. 7
8