Inserting the disk – MSI 163C User Manual
Page 55
2-37
Getting Started
Eject Button
Inserting the Disk
The following instruction describes the general procedure when operating
the optical storage device.
1. Confirm that the Notebook is turned on.
2. Press the Eject Button on the drive
’s panel and the disk tray will slide out
partially. Then, gently pull the tray out until fully extended.
3. Place your disk in the tray with its label facing up. Slightly press the
center of the disk to secure it into place.
4. Push the tray back into the drive.
This manual is related to the following products: