Replacing the halogen light – Mistral V ZUG LTD User Manual
Page 16
… Care and maintenance
16
Replacing the halogen light
A
Fold down the glass panel.
A
Using a small screw driver, carefully remove the
ring.
A
Replace the defective halogen light with a bulb
of the same type (max. 20 watts).
A
Clean the ring and the glass.
A
Fit the ring and the glass back into the openings.
A
Fold the glass panel up again.
A
Put back screw fuse or switch on circuit breaker again.
Remove screw fuse for appliance or switch off
circuit breaker.
Avoid touching the new halogen light with
bare hands. Use a soft, dry and grease-
free cloth.