MITSUBISHI ELECTRIC XD50U - Manual (Page 33)

E-32
Brightness 0
General Operation
Using the Quick Menu
This function permits frequently used adjustments to be
performed quickly.
Note that the Quick Menu will not be displayed unless the signal
of the connected equipment is input. Please select the input that
you wish to adjust.
Main unit operation
(1) Press the QUICK MENU button to display the quick ad-
justment display.
Further presses cause the adjustment display to change in
sequence.
Press the SELECT
̆ or ̄ button to switch to the desired
adjustment display.
(2) Press the SELECT
̇ or ̈ button to adjust.
Remote control operation
(1) A press of the QUICK MENU button brings up the quick
adjustment display.
Further presses cause the adjustment display to change in
sequence.
The adjustment display can be selected with use of either the
SELECT
̆ or ̄ button.
(2) Press the cursor ̇ or ̈ button to make the adjustment.
Pressing the “+” or “–” button will also switch the adjustment
display.
(3) To close the display immediately, press the CANCEL but-
ton.
In the absence of operations for a period of about 10 sec-
onds, the display will close automatically.
SOURCE AUTO
MENU QUICK
MENU
(1)
(2)
Brightness Adjusts the brightness of the image. See page E-40.
Contrast Adjusts the contrast of the image. See page E-40.
Keystone Corrects (vertical) keystone distortion of the screen. See page E-30.
Volume This function adjusts the volume of the built-in speaker. See page E-30.
Presentation timer Sets the time of the presentation timer. See page E-29.
Content of Adjustments and Settings
Example: Brightness adjustment display
Display Item
CANCEL
QUICK
ENTER
ZOOM
ASPECT AUTO
TIMER
KSTN
VOL
MENU
(3)
(1)
(2)
(2)
Adjustment/Setting