Nesco Convection Roaster Oven - Manual (Page 4)

FAN/MOTOR. Attaches easily to cover for exclusive convection cooking
performance. To operate the FAN/MOTOR you must plug into the receptacle, located
to the back of the Roaster Oven (See Fig. 1). The fan can be stopped or started at any
time during cooking by turning the motor “I” on or “0” off using switch on top of
housing. Note: The Plug and Receptacle are exclusive to the NESCO 12-
Qt.Convection Oven and will not work in 120 V a.c. wall outlets. No attempts should
be made to use the Receptacle for anything other than the intended use of the
FAN/MOTOR assembly.
COVER . Heavy gauge aluminum and high profile design, control heat and moisture
efficiently. Vent holes are provided to allow just the right amount of steam to escape
during cooking. During the cooking process, steam will accumulate inside the
Cookwell. Cover is provided with hinge clips that allow a convenient way to store the
Cover while serving or preparing foods. Always stand to the side when removing the
lid. Do not apply extra pressure to the Cover while in hinged position, damage to the
hinge clips may occur.
RACK. Chrome plated steel or Non-stick rack provides cooking flexibility. The rack
allows for easy baking and fat-free roasting.
COOKWELL. The porcelain enamel or Non-stick cookwell has a full 12-Qt.
capacity. It is removable for easy cleanup in dishwasher or sink, or for food storage in
your refrigerator.
HEATWELL/BODY. The sides of the 12-Qt. Convection Oven contain the
exclusive Circle Of Heat ® element for even, moist cooking, plus the added advantages
of thick insulation and a full range automatic oven temperature control. NEVER
PLACE FOOD OR WATER DIRECTLY INTO HEATWELL.
AUTOMATIC TEMPERATURE CONTROL. The Control regulates
cooking temperature to maintain the dial setting in the Roaster interior.
Fig 1
GET TO KNOW YOUR ROASTER OVEN