Memorex MX4111 - Manual (Page 14)

13
OPERATING INSTRUCTIONS (CONTINUED)
With the power off, press and
hold the TIMER/SLEEP button ❶
(TIMER on the remote) until
“TIMER” blinks in the display.
Press and hold the MEMORY/
TIME SET button ❷ until timer
hour digits blink in the display.
1 2
1
Within a few seconds, “TIMER” will
light in the display to indicate that
the timer is set. When the actual
time matches the time set for the
Timer, the unit will turn on to the last
function (CD or tuner) used.
TO TURN THE TIMER OFF SO
IT IS NOT SET FOR THE NEXT
DAY, press and hold the
TIMER/SLEEP button again until
“TIMER” disappears from the
display.
3
Press the TUNING/SKIP/Search
❶ or ❷ button to set the
hour, then press the MEMORY/
TIME SET button ❸ again; the
minute digits will blink. Press the
TUNING/SKIP/Search
❶ or
❷ button to set the minutes,
then press the MEMORY/TIME
SET button ❸ again.
1 3 2
2
SETTING THE TIMER
Set the timer to turn the unit on to the Tuner or CD mode at a preset time as follows :
Press the POWER ON/STANDBY
button to turn the unit on and tune
the desired radio station or insert a
CD as previously instructed.
1
Press the TIMER/SLEEP button a
second time to set the unit to turn
off after 80 minutes. Each
additional press with decrease the
sleep time by 10 minutes. After the
sleep time is set, you can press the
TIMER/SLEEP button at any time
to stop the Sleep function; “SLEEP”
will disappear from the display.
3
Press the TIMER/SLEEP button
and “90” will appear and “SLEEP”
will blink in the display.
2
ACTIVATING THE SLEEP FUNCTION
Set the sleep timer as follows:
The unit will revert back to standby mode one hour after the timer has been activated.
MX4111.O/M.QXD 7/11/02 4:06 PM Page 13