Musical Fidelity A308 - Manual (Page 5)

A308 Integrated Amplifier Instructions for use Page 5 of 9
REMOTE CONTROL
Issue 3: March 2003
REMOTE CONTROL
The blue buttons on the remote control enable main functions of the amplifier to be operated
from a convenient distance. Remaining buttons on this universal handset are for use with other
Musical Fidelity products, and have no effect on the A308 Integrated amplifier.
Equivalent buttons on the remote handset have the same functions as those on the front panel of
the unit.
As the remote control uses an invisible infra-red light beam, the transmitter must be pointed
directly towards the receiver window on the front of the amplifier, without visual obstruction
between them.
Pressing the volume-up or -down buttons on the remote handset will advance the motorised
volume control in the required direction.
Pressing the MUTE button mutes the SPEAKER output and PRE-OUT sockets, but has no
effect on the TAPE OUT sockets for recording. To show that the amplifier is muted, the red
LED on the front panel will light. Press the MUTE button again to cancel mute function, and
the LED will go off.
If the range of the remote control greatly decreases, replace the batteries with new ones.
Do not mix old and new batteries - two are required, type SUM-4, AAA or LR03.
VOLUME
(UP)
VOLUME (
DOWN )
MUTE button
TUNER input select
PHONO pickup
input select
AUXILIARY 1
input select
CD input select
TAPE input select
AUXILIARY 2
(direct) input select