Miller Electric M-25 - Manual (Page 7)

OM-227 796 Page 3
SECTION 2 − SAFETY INFORMATION
Read all safety messages throughout this manual.
Obey all safety messages to avoid injury.
Learn the meaning of WARNING and CAUTION.
1 Safety Alert Symbol
2 Signal Word
WARNING means possible death
or serious injury can happen.
CAUTION means possible minor
injury or equipment damage can
happen.
3
Statement Of Hazard And
Result
4 Safety Instructions To Avoid
Hazard
5 Hazard Symbol (If Available)
6 Safety Banner
Read safety blocks for each
symbol shown.
7
NOTE
Special instructions for best
operation − not related to safety.
2
NOTE
ELECTRIC SHOCK can kill.
•
Do not touch live electrical parts.
•
Disconnect input power before
installing or servicing.
WARNING
READ SAFETY BLOCKS at start of
Section 3-1 before proceeding.
WARNING
5
4
6
7
1 2
CAUTION
MOVING PARTS can injure.
•
Keep away from moving parts.
•
Keep all panels and covers closed
when operating.
3
Turn Off switch when using high frequency.
SECTION 3 − INSTALLATION
3-1. Specifications
Air-Cooled Welding Gun For GMAW And FCAW Welding
Note: Using gasless flux cored wire reduces gun duty cycle.
804 466-A
M-25 Feeds .023 To .045 in (0.6 To 1.1 mm) Hard Or Flux Cored Wires
Duty Cycle Rating:
100%: 250 A With CO
2
Shielding Gas; 150 A With Mixed Gases
60%: 300 A With CO
2
Shielding Gas; 250 A With Mixed Gases
Weight With 15 ft (4.6 m) Power Cable: 6.0 lb (2.7 kg)
Identified With
J J j On Power Cable