Memorex MX3710 - Manual (Page 12)

11
To repeat a single track, press the
REPEAT/PRE UP button ❶ twice;
“REPEAT” will blink in the display.
Press the TUNING/CD SKIP/
SEARCH (
) ❷ or ( ) button
❸ to select the specific track that
you wish to repeat. When the
desired track number appears in
the display, press the
PLAY/PAUSE (❿ ) button ❹ to
begin playback. The specific track
you selected will be repeated
continuously.
2
1
4
3
1
To cancel Repeat Playback,
press the REPEAT/PRE UP
button ❶ until “REPEAT”
disappears from the display. You
can also cancel Repeat Playback
by pressing the CD OPEN/
CLOSE button ❷.
1
2
3
To repeat all of the tracks on a
disc continuously, press the
REPEAT/PRE UP button ❶ once;
“REPEAT” will light solid in the
display. Press the CD
PLAY/PAUSE (❿ ) button ❷ to
begin all tracks repeat.
1
2
2
REPEAT PLAYBACK
Press the BAND/STOP (■) button
to select CD.
1
Press the MEMORY/TIME SET
button; “P-01” (program number),
“01” (track number) will appear
and “MEMORY” will blink in the
display.
3
Press the CD OPEN/CLOSE
button to open the CD compart-
ment door.
Gently press a CD onto the
center spindle, with the printed
label side facing out. Close the
CD compartment door.
2
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
OPERATING INSTRUCTIONS (CONTINUED)
MX3710.O/M.QXD 4/30/02 10:49 AM Page 11