Morphy Richards 43541 - Manual (Page 6)

44
BEFORE FIRST USE
Before using the appliance for the
first time, fill with water, boil, and
pour away.
USING
Filtering your water improves the
taste and appearance of beverages
by reducing limescale, lead, chlorine
and other impurities.
This is how the BRITA MAXTRA
filter cartridge works:
The unique BRITA MAXTRA filter
cartridge A offers improved
filtration due to MAXTRA
technology.
The natural MicroporeFilter in
combination with the powerful
ProtectFilter reduces chlorine and
limescale for a great natural taste
and permanently absorbs metals
such as lead, copper and aluminium
for your wellbeing. MAXTRA
FlowControl ensures the perfect
filtration time for best results.
USING THE
CARTRIDGE
• Little effort - great effect:
Preparation of your BRITA MAXTRA
Cartridge is very simple. Please
follow the steps below to enjoy
BRITA filtered water.
1 Preparing the cartridge B:
To prepare your BRITA MAXTRA
cartridge, please remove the
protective wrapper (note: the
cartridge and inside wrapper may
appear moist, this is simply
condensation). Immerse the
cartridge in cold water and shake it
gently to remove any air bubbles, the
filter is now ready for use.
Note: As is required for some other
water filter cartridges, there is no
need to pre-soak the MAXTRA
cartridge.
2 Insert in the funnel C:
Place the filter cartridge into the
funnel and push downwards until it
fits firmly in the funnel. The cartridge
should stay in place if the funnel is
turned upside down.
3 Rinse the cartridge D:
Fill the funnel with cold tap water
and allow it to filter through. Discard
the first two fillings or use the water
for your plants. These first two fillings
are used to flush the filter cartridge.
Now re-fill the funnel and the kettle is
ready for use.
There is no need to keep the
cartridge immersed in water.
• Removing the cartridge with the
ring pull E:
To exchange the cartridge after four
weeks, simply use the ring pull
handle on the top of the cartridge to
remove it from the funnel, and repeat
steps 1-3 above for the replacement
filter.
For information or advice on using
BRITA MAXTRA or BRITA Memo,
please call BRITA Customer Care
on 0844 742 4800
BRITA MEMO -
THE ELECTRONIC
CARTRIDGE
EXCHANGE
REMINDER
THE BRITA Memo:
For maximum filter performance and
for optimum taste, it is important to
change your BRITA cartridge
regularly. BRITA recommends that
you replace the cartridge in your
appliance every 4 weeks.
BRITA Memo automatically
reminds you when to change the
cartridge:
The unique BRITA Memo measures
the recommended time of use of
your cartridge and is easy to use.
The BRITA Memo is located on the
kettle lid.
Operation is really simple:
• Start the Memo display F:
To start Memo, please press and
hold down the start button on the
lid until all four bars appear in the
display and flash twice. The Memo
is now set.
• Functional control F:
The flashing dot in the bottom right
corner of the Memo indicates that
the Memo is working.
C
D
E
UUKK HHeellpplliinnee 00884444 887711 00995544 RReeppllaacceem meenntt PPaarrttss 00884444 887733 00772200 IIrreellaanndd HHeellpplliinnee 11880000 440099 111199
2x
B
F
A
43541 Rev1 29/4/08 16:27 Page 6