Goodman Mfg TSTATG2111 - Manual (Page 13)

Page 5.1
SECTION 5
Test Operation
5
Press the MODE button repeatedly until the
HEAT icon appears on the display. Press
UP or DOWN buttons until the set temperature
is 10 degrees above room temperature. The
furnace should turn on.
the
Press the MODE button repeatedly until the
COOL icon appears on the display.
or DOWN buttons until the set temperature is 10
degrees below room temperature. The air
conditioner should turn on.
Press the UP
Turn the power on to the Heating/Air Conditioning
system.
Press the UP button until the setpoint is equal to
the room temperature. Press the FAN button
to Fan On. The fan should turn on and run
continuously.
NOTE: Most equipment has a time delay of 5 min-
utes between cool cycles. This feature is defeat-
able on the thermostat. Consult the Owner's Man-
ual under Setup, cycles per hour (page 11.3).
Air Conditioning & Heating
AU TO I2:0 0 Pm HE AT CO OL 72
74
AU TO I2:0 0 Pm HE AT CO OL 72
74
AU TO I2:0 0 Pm HE AT CO OL 72
74
AU TO I2:0 0 Pm HE AT CO OL 72
74