GE UF-4000 - Manual (Page 42)

Sending Documents
42
Memory Transmission
Manual Number Dialing
To dial the telephone number manually, follow the steps below.
NOTE
1. If you need a special access number to get an outside line, dial it first then press to
enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press (represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9 PAUSE TONE 5551234
1
Set document(s) face down.
DOCUMENT SET
2 Enter a telephone number from the Keypad.
(Up to 36 digits)
You can also designate more that one destination.
Ex:
5551234 ❚
3
The document(s) begin to store into memory.
Then starts dialing the telephone number.
* STORE * 05%
5 5 5 1 2 3 4
PAUSE