Grizzly G7210 - Manual (Page 8)

-6- G7209/10 14'' Table Saw
Push Paddles
Push paddles provide added leverage and sup-
port when ripping or crosscutting wide work-
pieces. Grizzly offers a number of push paddles
in the Grizzly catalog. See
Figure 3.
Featherboard
Easily made from scrap stock, featherboards
provide an added degree of protection against
kickback. To make a featherboard, cut a 30-
40° angle at one end of the board and make a
number of end cuts at approximately
1 ⁄
4
" apart
and 2" to 3" deep. Grizzly also offers a number
of featherboards in the Grizzly catalog. See
Figure 4.
Figure 2. Zero Clearance Table Inserts
Figure 3. Push Paddles
Figure 4. Featherboard