Goodman Mfg GKS9 User Manual
Gks9 g, Attention installing personnel, Nstallation
Goodman Manufacturing Company, L.P.
5151 San Felipe, Suite 500, Houston, TX 77056
www.goodmanmfg.com
©
2006-2008, 2010 Goodman Manufacturing Company, L.P.
I
NSTALLATION
I
NSTRUCTIONS
GKS9
G
AS
-F
IRED
W
ARM
A
IR
F
URNACE
*NOTE: Please contact your distributor or our
website for the applicable Specification Sheet
referred to in this manual.
ATTENTION INSTALLING PERSONNEL
As a professional installer you have an obligation to know the product better than the customer. This includes all safety
precautions and related items.
Prior to actual installation, thoroughly familiarize yourself with this Instruction Manual. Pay special attention to all safety
warnings. Often during installation or repair it is possible to place yourself in a position which is more hazardous than
when the unit is in operation.
Remember, it is your responsibility to install the product safely and to know it well enough to be able to instruct a
customer in its safe use.
Safety is a matter of common sense...a matter of thinking before acting. Most dealers have a list of specific good safety
practices...follow them.
The precautions listed in this Installation Manual are intended as supplemental to existing practices. However, if there is
a direct conflict between existing practices and the content of this manual, the precautions listed here take precedence.
(Type FSP CATEGORY IV Direct or Non Direct Vent Air Furnace)
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
Installer: Affix all manuals adjacent to the unit.
C
US
®
These furnaces comply with requirements
embodied in the American National Standard
/ National Standard of Canada ANSI
Z21.47·CSA-2.3 Gas Fired Central Furnaces.
This furnace is shipped from the factory as a Dedicated Upflow. A “Blocked Drain Kit” is available and MUST
BE USED if the furnace is installed Horizontal Left or Horizontal Right. Check the Serial/Rating Plate on the
furnace for the Kit part number.
IO-300J
12/10