Grizzly G0470 - Manual (Page 6)

model G0464/G0465/G0467/G0468/G0470 (mfg. since 9/04) - 4
-
section 1: safety
indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
it may also be used to alert against unsafe practices.
indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
this symbol is used to alert the user to useful infor-
mation about proper operation of the equipment.
safety instructions for pneumatic tools
for your own safety read instruction manual
before operating this equipment
the purpose of safety symbols is to attract your attention to possible hazard-
ous conditions. this manual uses a series of symbols and signal words which
are intended to convey the level of importance of the safety messages. the
progression of symbols is described below. remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
1. read through the entire
manual before starting
machinery. machinery presents
serious injury hazards to untrained
users.
2. alWays use ansi approved
safety glasses When
operating machinery. Everyday
eyeglasses only have impact resistant
lenses, they are NOT safety glasses.
3. alWays Wear an ansi
approved respirator When
operating machinery that
produces dust. Wood dust is a
carcinogen and can cause cancer and
severe respiratory illnesses.
NOTICE
4. alWays use hearing
protection When operating
machinery. machinery noise can
cause permanent hearing damage.
5. Wear proper apparel. DO NOT
wear loose clothing, gloves, neckties,
rings, or jewelry which may get caught
in moving parts. Wear protective hair
covering to contain long hair and
wear non-slip footwear.
6. never operate machinery
When tired, or under the
influence of drugs or
alcohol. Be mentally alert at all
times when running machinery.
indicates an imminently hazardous situation which, if
not avoided, Will result in death or serious injury.