No signal menu – Grundig CP-731i User Manual

Page 17

ENGLISH-16

TIIO

S ((cco

nttiin

ueed

d))

No Signal Menu

The same adjustments and settings are available as with the Image and
Options menus when the MENU button is pressed during display of the
“NO INPUT IS DETECTED ON ***” or “SYNC IS OUT OF RANGE
ON ***” message while no signal is received.

Table 7. No Signal Menu

VOLUME

KEYSTONE

BLANK

MIRROR

START UP

MENU COLOR

TIMER

LANGUAGE

AUTO OFF

SYNC ON G

40
+1

Item

Description

VOLUME

Volume adjustment:

Reduce VOLUME

↔

Increase VOLUME

KEYSTONE

Adjustment:
Reduce size of bottom of image

↔

Reduce size of top of image

BLANK

Select blank screen color:

Select color with the

and

buttons.

• When the blank mode is set with BLANK ON, by absence of a signal, or by

input of a non-standard signal, the image is cleared and the complete screen is
displayed in the selected colour.

MIRROR

Operation start/stop:

Press the

button.

Select Mirror status:

Select mirror status with

and

buttons.

START UP

Operation start/stop:

Press the

button.

Setup initial screen display:

Select TURN ON with the

button.

Clear initial screen display:

Select TURN OFF with the

button.

• Note that if TURN OFF is selected the screen is displayed in blue

when there is no signal.

MENU COLOR

Select menu background color:

Select with the

and

buttons.

TIMER

Operation start/stop:

Press the

button.

Setup initial timer value:

Set 1~99 minutes with the

and

buttons.

LANGUAGE

Operation start/stop:

Press the

button.

Select menu display language:

Select with the

and

buttons.

AUTO OFF

Operation start/stop:

Press the

button.

Set AUTO OFF:

Set 1~99 minutes with the

and

buttons.

The system automatically enters the standby mode when a signal is
not received for the set time.

Clear AUTO OFF:

Select STOP (0 min.) with the

button.

When STOP is selected the system does not enter the standby mode
even if no signal is received.

SYNC ON G

Operation start/stop:

Press the

button.

SYNC ON G valid:

Select TURN ON with the

button.

SYNC ON G invalid:

Select TURN OFF with the

button.

• May not be displayed correctly with some input signals when SYNC ON G is

valid. In such cases, remove the signal connector so that no signal is received,
set SYNC ON G to invalid, and reconnect the signal.