Graco AlanoTM User Manual

Page 62

6.3 Installing the Infant Restraint/Base

Using Vehicle Belt

You must carefully follow the instructions provided by your vehicle

manufacturer, in addition to the information in this manual. Before

proceeding, be sure you have read and understood section 5,

“Infant Restraint Location” on p. 20-25.

Make sure vehicle is on level ground so that

the level indicator, which is attached to the

infant restraint, can be used to properly

recline the infant restraint

➊

If a front passenger seat is used, slide the

vehicle seat rearward as far as possible

from the dashboard. If a rear seat is used,

make sure the seat in front of it is moved

forward enough and is upright enough to

allow room for the infant restraint.

1. Remove infant restraint from base,

regardless of whether or not you plan on using the base.

2. Place the base

➋

or infant restraint without base

➌

in a

rear-facing position in a forward-facing vehicle seat.

➋

➌

➊