Global Machinery Company HC1500 - Manual (Page 9)

9
Assembly
Caution. Never carry out any assembly operations or
adjustments with the power connected to the mower.
Always ensure that the power button is in the off position
and that the power plug is disconnected from the supply.
1. Fit the two ends of the lower handle (8) into the slots
in the mower body (7) and fix them in position with
the two lower handle fixing clips (9).
2. Fit the upper handle (1) to
the lower handle (8) and
secure them together with
the coach bolts, washers and
wing knobs (5). Ensure that
the bolt is inserted from the
inside of the handle so that
the wing knob (5) attaches
on the outside.
3. Using the two cable clips (15), secure the black-
coloured motor cable (14) to the lower handle (8) and
upper handle (1).
Note. Make sure that the switchbox is facing upwards
and that the power cable (22) is not wrapped around the
handle. It must trail freely behind the switchbox on the
upper handle.
Adjusting the cutting height
Caution. Never carry out any assembly operations or
adjustments with the power connected to the mower.
Always ensure that the power button is in the off position
and that the power plug is disconnected from the supply.
1. Choose a level area with a
firm surface and remove the
grass box (10).
2. Access the blade spanner
(12) and blade height
spacers (21).
3. Turn the mower on its side.
4. Put on a pair of sturdy
gloves to protect your hands.
5. Block the rotation of the
blade (19) and use the
blade spanner (12) to
unscrew the blade bolt (20)
in an anti-clockwise direction
(viewed from underneath).
6. Remove the blade bolt (20), blade (19) and blade
height spacer (21).
1 1
2
3 3
1
5
6 6