GE DBLR333GT - Manual (Page 14)

Safety Infor
mation
Operating Instr
uctions
Tr
oubleshooting T
ips
Customer Ser
vice
Before you call for service…
14
Troubleshooting Tips
Problem Possible Causes What To Do
Lint on clothes Lint filter is full • Clean lint screen before
each load.
Improper sorting • Sort lint producers
(like chenille) from lint
collectors (like corduroy).
Static electricity can • See suggestions in this
attract lint section under STATIC.
Overloading • Separate large loads into
smaller ones.
Paper, tissue, etc. • Empty all pockets before
left in pockets laundering clothes.
Static occurs Overdrying • Try a fabric softener.
• Adjust controls for less
drying.
No fabric softener • Try a fabric softener.
was used
Synthetics, permanent • Try a fabric softener.
press and blends can
cause static
Inconsistent drying times Type of heat • Automatic drying times
will vary according to the
type of heat used (electric,
natural or LP gas), size of
load, types of fabrics,
wetness of clothes and
condition of exhaust ducts.