Graco 249065 User Manual
Page 12
12
309828
Spray tips have 4– or 5–digit numbers on them.
The first two digits are the spray angle. Tip
holding holes are provided on the chassis.
1. Perform Pressure Relief Procedure, page 7.
2. Point the gun and wand away from you and anyone else.
3. Without holding your hand over spray tip (A), pull back quick
coupler ring (B). Remove current tip. Install a different one.
Then push the ring back on.
Installing and Changing Spray Tips
Spray Tip
Number
Spray Pattern Fan Angle
00XXX
15XXX
25XXX
40XXX
Chemical
0
_ blaster (red)
15
_ (yellow)
25
_ (green)
40
_ (white)
XX
_ (black)
NOTE: The chemical injector tip is brass and has a large opening and a black plastic cap.
B
A
To avoid blowing the o–ring out of the
quick coupler due to the high pressure in
the system, never operate pressure
washer without a tip securely mounted in
quick coupler.
CAUTION