Golden Technologies LitewayTM - Manual (Page 20)

Transporting Your Scooter
To transport your scooter you may need to dismantle it. Follow these step by step instructions
Step 1: Preparation
1. Turn off the ignition and remove key.
2. Fold down the backrest and lift off the seat.
3. Pull the seat upwards and it will release.
4. When assembling the seat make sure the
seat is located correctly then turn until it
locks.
Step 2: Tiller
1. Fold the tiller as shown on page 19. You
can remove the under seat basket or leave it
in position.
2. The under seat basket is retained with mag-
nets. To remove grab the basket handle and
pull out.
3. To replace, locate into the same position and
push in until you feel the magnets locate.
Do not trap cable when folding
20
Do not trap cable when folding
Golden Liteway GL-100 Owner’s Manual Revised 11/06