Gefen EXT-DPKVM-241 - Manual (Page 15)

12
ADDITIONAL SWITCHING OPTIONS
The underside of the 2x1 DisplayPort KVM features a DIP swich bank that is
used to confi gure additional features. Specifi cally, DIP switches 3 & 4 will control
the function of the IR Extender port on the rear panel.
DIP SWITCH Function
1 IR Channel
2 IR Channel
3 Remote/Closure
4 IR Extender
DIP Switch 3
Enabling DIP switch 3 will allow the user to utilize a contact closure type of
remote control such as Gefen product # EXT-RMT-2 to initiate input switching. By
default, this switch is in the OFF position and will rely on the standard switching
methods outlined previously in this manual.
DIP Switch 4
DIP switch 4 is the master switch that will enable/disable the ability to use an
IR remote extender (Part# EXT-RMT-EXTIR) for relocation of the IR receiver.
By default, this switch is in the OFF position and will disable the use of an IR
Extender.
This port can be
confi gured to accept
additional switching
devices