GIGABYTE GV-3D1-7950-RH - Manual (Page 7)

Hardware Installation - 7 -
English
2. Replace the screw to fasten the card in place,
and replace the computer cover.
You are now ready to proceed with the installation of the graphics card driver. Please refer
to next chapter for detailed instructions.
After installing the GV-3D1-7950-RH to your computer, please
remember to connect at lease one power cable on the graphics card
to the power supply connector.
We suggest you to connect both of the two power cables on the
graphics card to the power supply to achieve optimal graphics
performance.
3. Plug the display cable into your graphics
card; then turn on the computer and monitor.
To connect a flat panel directly to your
graphics card, use the DVI-I connector. To
connect a VGA monitor to the DVI-I
connector, plug the DVI-I to D-sub adapter
into the DVI-I connector, then plug the monitor
cable into the adapter.
Connect a flat panel
Connect a VGA monitor via DVI-I to D-sub adapter
To TV / VCR
To Flat Panel Display