GE 20309 - Manual (Page 11)

11
Using Your Remote, cont.
Controlling Devices with Separate Power On and Off Buttons
Some GE, RCA and ProScan models require you to press the device
button for more than one second to turn the device on and the
POWER button to turn the device off.
Controlling Combo Devices
Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) will
require you to set up two different Mode buttons to control both
parts of the Combo device. For example, if you have a TV/DVD
Combo, you might need to set up one code under the TV button to
control the TV part AND a separate code (under any other Mode
button) to control the DVD part.
VCR/DVD Punch-Through
This remote allows the 6 VCR transport buttons (i.e. PLAY, PAUSE,
STOP, FF, REWIND, and REC) to Punch-Through control from any
Mode programmed with TV, SAT or Cable codes to the last VCR, or
DVD programmed Mode you used. This feature will not operate if
the programmed TV, SAT or Cable code has its own VCR transport
button control e.g. a TV Combo, SAT/PVR, etc.