Go-Video VR3840 - Manual (Page 34)

34
DVD/VCD Playback (Continued)
Playing a DVD/Video CD
(Continued)
Camera Angle
If a DVD contains scenes recorded at different camera
angles, you can select among these angles during play-
back.
Press ANGLE then press b / B repeatedly during
playback to select the desired angle.
The number of the current angle appears on the TV screen.
ip
The Camera Angle icon is displayed on the TV screen when
alternate angles are available.
Changing the Audio Language
Press AUDIO then press b / B repeatedly during play-
back to hear a different audio language or audio track.
ote
Some discs feature both Dolby Digital and DTS sound-
tracks. There is no analog audio output when DTS is
selected. To listen to the DTS soundtrack, connect this
recorder to a DTS decoder via one of the digital out-
puts. See page 17 for connection details.
Changing the Audio Channel
Press AUDIO then press b / B repeatedly during play-
back to hear a different audio channel as shown below:
- VCD: STEREO, LEFT, or RIGHT.
- Video: L+R, L+L, or R+R.
With DVD-RW discs recorded in VR mode that have
both a main and a bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of both
(Main + Bilingual) by pressing AUDIO.
3D Surround
The DVD Recorder+VCR can produce a 3D Surround
effect, which simulates multi-channel audio playback
from two conventional stereo speakers.
1 Press DISPLAY twice then use v / V to select the
Sound icon. Then, use b / B to select “3D SUR.”.
2 To turn off the 3D Surround effect, select “NORMAL”.
Subtitles
Press SUBTITLE then press b / B repeatedly during
playback to select among all available subtitle lan-
guages.
Finding Locations on a Disc
Use the SEARCH button to access virtually any point
during Video CD playback.
1 Press SEARCH during playback.
The progress bar appears on the TV screen.
2 Use b / B to find the desired starting position for
playback.
3 Press ENTER to confirm the selected position.
Playback starts from the selected position.
ote
This function will not work if any bookmarks have been
set; see page 33.
Remember Disc Settings
The DVD Recorder+VCR automatically memorizes the
settings from the last disc you viewed. Settings remain
in memory even if you remove the disc from the DVD
Recorder+VCR or switch off the DVD Recorder+VCR. If
you load a disc that had its settings memorized, the lat-
est Stop position is automatically recalled.
otes
Settings are stored in memory for use at any time.
The DVD Recorder+VCR does not memorize disc
settings if you switch off the DVD Recorder+VCR
before playing the disc again.
This function may not work on some DVDs.
DVD
VCD
ABC
OFF DVD
NORMAL
VCD VR Video DVD
VCD Video VR
5.1CH
1. ENG
DVD
1/3 DVD
33% PBC
33% TRK 1