Gefen EXT-HDMI1.3IR-FO-141 User Manual
Page 5
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE HDMI 1.3 OVER FIBER WITH IR
•
Use one SC terminated multi-mode fi ber optic cable and one industry
standard CAT-5, CAT-5e or CAT-6 cables to operate the HDMI 1.3 Over
Fiber with IR. Gefen recommends CAT-6 cabling for maximum performance.
•
For 1080p video, maximum extension is 1000 feet (330 meters).
•
IR repeater functionality is only from the receiving unit to the sending unit. IR
data cannot be transmitted from the sending unit to the receiving unit.
•
The RS-232C protocol is used for remote control of A/V devices at the
extended display device location. The full RS-232 protocol is not supported
for this purpose.
2