GE Universal Remote with PC Control HO97685 - Manual (Page 12)

The procedure on page 8 assumes that
you want to store VCR codes under the
VCR button, Cable codes under CBL,
etc. If you want to store a VCR code
under CBL, etc., first follow the proce-
dure on page 7 and try ANY CBL code
from the code tables, e.g. press CBL in
step 3, page 8, and then enter ANY VCR
code. Then follow the steps on page 8.
Identifying Codes found using
the Search Procedure
1. Press and hold SETUP until the LED
indicator lights steadily. Release the
Setup button.
2. Press the mode button that matches
the equipment you want to identify
(TV, DVD, VCR, CBL). The LED blinks
once.
3. Press and release SETUP. The LED
blinks once.
4. To find the first digit, press each
number button from 0 to 9 until the
LED blinks. The number you pressed
is the first digit of the code.
5. Press each number button from 0 to
9 again as above to find the second
digit.
6. Press each number button in turn to
find the third digit. When the third
digit has been found, the LED goes
out.
9