Gefen Gefen - Manual (Page 7)

Connect your computers VGA, USB, and audio to the 4x1 VGA Switcher inputs using
the supplied cables.
Connect one or two VGA monitor to the VGA Out. If only one monitor is connect you
must use VGA Out 1.
Connect your USB and audio devices to the USB and audio outputs.
Connect the RMT-4 remote control (if applicable).
Plug the 12VAC power supply into the 4x1 VGA Switcher.
Your computers must be turned on one at a time and the switcher must be selected
to the computer that is booting up. After one computer completes the startup process,
you can boot up the second computer and repeat the process with the remaining
computers.
HOW TO CONNECT THE 4x1 VGA SWITCHER
1
2
3
4
5
6
4