Specifications, Surface mount annunciator, Flush mount annunciator – Generac Power Systems 5466 User Manual
Page 2
Specifications
Surface Mount Annunciator
21 Light Remote Annunciator
Flush Mount Annunciator
Function
Color
Alarm
Latched
Pre-Low Oil Pressure
Yellow
n
Yes
Yes
Pre-High Water Temp
Yellow
n
Yes
Yes
Pre Low Water Temp
Yellow
n
Yes
Yes
Pre-Low Fuel
Yellow
n
Yes
Yes
Battery Charge AC Fail
Yellow
n
Yes
No
Low Battery Voltage
Yellow
n
Yes
No
High Battery Voltage
Yellow
n
No
No
Not in Auto
Red
n
Yes
No
RPM Sensor Loss
Red
n
Yes
Yes
Overcrank
Red
n
Yes
Yes
Overspeed
Red
n
Yes
Yes
Low Oil Pressure
Red
n
Yes
Yes
Hi Water Temp
Red
n
Yes
Yes
Low Water Level
Red
n
Yes
Yes
Emergency Stop
Red
n
Yes
No
Gen Running
Yellow
n
No
No
Gen Power (ATS)
Yellow
n
No
No
Line Power (ATS)
Green
n
No
No
Systems Ready
Green
n
Yes
No
Communications OK
Green
n
Yes
No
Spare
Green
n
No
No
Spare Keypad Switch - Can be used to implement a remote start function. (Model 5464 only)
5.8
4.53
0.812 Dia.
0.812 Dia.
Both sides
0.86
9.06
1.64
2.32
6.49
11.42
8.27
9.64
Outside
Cut
Rough Opening
6.75 " x 9.88 "
Four mounting holes for
21 Light Annunciator
4-mm -0.7 Female Thread
1.57
Thru
R0.59
Both Sides
1.93
10.24
7.09
1.21
1.42
0.87
The 21-Light Annunciator can mount to
a flat surface with connections through
the 0.812 Dia. knockout on the back
surface or through 0.812 knockouts on
sides as shown.
This Flush Mount Box is recessed
into the wall opening and the sur-
face mount annunciator mounts to
the (4) 4 mm screw holes on the
back surface. After wire connec-
tions are made the front annuncia-
tor cover is attached.
Generac Power Systems, Inc. • P.O. Box 297, Whitewater, WI 53190 • guardiangenerators.com
©2008 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0177350SBY/Printed in U.S.A. 04.08, rev. 05.08