Guardian Technologies HR70 - Manual (Page 8)

Guardian Telecom Inc.
Installation and Operation
Model HR70
Page 8
Programming the HR70
A direct memory access register can be assigned to each of the 10 number
keys.
Each direct memory access register can contain up to 20 characters.
Tip: Valid characters are
0-9, *, # and Pause.
• Lift the telephone handset off the hook.
• Press
Program to put the phone into programming mode.
• Press
Memory.
• Press a number key 0-9.
• Enter the telephone number you want to store (e.g. 1-800-363-8010).
Tip: The number
selected is assigned to
the access register.
• If your phone requires you to dial 9 (or other digit) to access an outside line,
press the 9 key, then the Pause key, then enter the telephone number you
want to store (e.g. 9 PAUSE 1-800-363-8010).
• Press
Program to leave programming mode and return to normal telephone
operation.
Operating the HR70
Manual Operation:
• Lift the handset and dial manually.
Tip: Valid keys for
manual dialing are 0-9, *
and #.
Automatic Memory Dialing:
• Lift the handset.
Tip: Program the HR70
to use this quick dialing
method.
• Press
Memory.
• Press a number key 0-9.
• The number stored in the register will automatically dial.