GE MG13400 - Manual (Page 16)

Memorizing the channels
Storing channels in memory
Your TV can memorize and store all of the channels you can receive.
Once these channels are in memory, you can use the CH
▲ and CH ▼
buttons to quickly scan through the available channels.
1 Press MENU repeatedly until you see the Setup menu.
Press VOL+. You will see a screen for selecting the kind of antenna
or cable system you connected. If you connected an antenna,
leave “Antenna” highlighted. If you connected cable, press CH
▼
to highlight the type of cable you have: STD, HRC, or IRC.
✓ If you are not sure which type of cable system you have, contact your cable
company.
Press VOL +. The TV will begin memorizing all of the stations.
The TV cycles through the channel numbers and memorizes the
available channels. This takes one to two minutes. When the TV is
finished, it will display the “Memorize channels” screen.
✓ Press MENU at any time to interrupt the memorization process and return to
normal viewing.
4 Press MENU twice to clear the screen.
Adding and Erasing Channels
A channel can be manually added to or erased from memory.
1 Press MENU repeatedly until you see the Setup menu. Press CH ▼
to highlight “Add/Erase.”
2 Press VOL +. You will see the Add/Erase menu screen.
Add/Erase
ANT 11 Erased Added
Press "Menu" to finish.
Channels
Caption
Language
Memorize
Add/Erase
Fine tune
to begin
Video
Time
Setup
Memorize channels
Use the buttons
to select
Antenna
Cable STD
Cable HRC
Cable IRC
(Option)
Press to memorize
or "Menu" to cancel.
Channels
Caption
Language
Memorize
Add/Erase
Fine tune
to begin
Video
Time
Setup
TV O PERATION
12 C HAPTER T HREE : TV O PERATION
1
2
3
1
2
4
1547290B (MG20-E) 3/29/01 10:25 AM Page 16