Gravely 927062-1232 - Manual (Page 11)

GB - 11
MOVING THE UNIT MANUALLY
Disengage transmission
bypass lever to drive unit and
engage transmission bypass
lever to push unit manually
(figure 4).
SEAT ADJUSTMENT
1. Remove detent pin from unit (figure 5).
2. Tip seat forward.
3. Loosen mounting hardware and slide seat
forward or backward to desired position.
Tighten mounting hardware.
4. Put seat down and install detent pin.
TRANSPORTING UNIT
ALWAYS turn engine off when transporting on
truck or trailer. Tie unit down securely. Do not
tie down by linkages, guards, cables or other
parts that may be damaged.
WARNING: DO NOT disengage or
bypass transmission and coast
downhill.
05305700A
OA0080
OA0041 Figure 4
Transmission Bypass Lever Engaged to
Push Unit Manually
1
2
Transmission Bypass Lever Disengaged
to Drive Unit
OE0043
Mounting Hardware
Seat
Detent Pin
Figure 5