Gefen EXT-DPKVM-841 - Manual (Page 23)

20
RS-232 COMMANDS
#USE_TELNET_PASS Command
The #USE_TELNET_PASS command enables / disabled the use of a Telnet
password during the login process.
Syntax:
#use_telnet_pass param1
Parameters:
param1 State [0 - 1]
Value Meaning
0 Disable password
1 Enable password
General Commands
Command Description
#activebolo Activates the bootloader
#fadefault Resets the Switcher to the default routing state
#irrmtadd Sets the IR address for the Switcher
#lockpower Toggles the lock power state
#stbymode Toggles Standby (power OFF) Mode
#ACTIVEBOLO Command
The #ACTIVEBOLO function activates the bootloader. This command is required
in order to begin the fi rmware update procedure. See page 26 for details.
Syntax:
#activebolo
Parameters:
None
Notes:
This command must be executed twice, in order to active the bootloader.