Grace Digital Schooners SCN300W - Manual (Page 10)

10
SWITCHING OFF
OTHER CONTROL
1. If there is no audio input signal to transmitter in 4 minutes, transmitter will go
to standby mode and LED will change from Blue to Green.
2. If the power adapter is unplugged, the LED on transmitter will turn off.
3. Speaker will turn to standby mode if there is no input signal to transmitter
and LED will become Green. Speaker will automatically shut off when standby
mode continues for 5 minutes.
4. Speaker will also turn to standby model if you press the POWER button on
the remote control to Green LED. Speaker will automatically shut off after 5
minutes.
5. At standby mode, speaker will turn to On automatically after getting signal
from transmitter.
1. Select volume up and down on Speakers or Remote Control Unit.
2. Select Bass Boost On/OFF by pressing the “BASS BOOST” button on Speakers or
Remote Control Unit.
3. If you hear interference from other components, re-adjust the tuning control
by moving channel knob to 1, 2 or 3 of the transmitter, then pressing “AUTO
TUNE” button on speaker or remote unit for best reception.