GPX CC319B - Manual (Page 2)

CUSTOMER HELPLINE | 1-314-621-2881 GPX | CC319B
Setting the Clock AC Power Battery Backup
Tuning the AM or FM Radio
Playing a CD Playback Features
Improving Radio Reception Setting the Alarm Time
Choosing an Alarm Source
Activating the Set Alarm
Gradual Wake - What does it mean?
Whenever the alarm sounds on the unit, the
volume level will start low and gradually rise
until it reaches the level set on the Volume dial.
This makes for a considerably less abrupt wake-
up call in the morning.
Setting the Sleep Timer
BASIC OPERATIONS
USING THE ALARMS USING THE AM OR FM RADIO
POWERING THE UNIT
USING THE BUILT IN CD PLAYER
Press the POWER button to turn the clock radio off.
The Power Indicator Light will go out when the clock radio
is powered off.
Press and hold the CLOCK ADJUST button for 3-5
seconds.
The hour on the clock will begin to blink.
Press the CLOCK SET buttons to adjust the hour.
Press the CLOCK ADJUST button.
The minute on the clock will begin to blink.
Press the CLOCK SET buttons to adjust the minute.
Press the CLOCK ADJUST button to finish setting the
clock.
Plug the attached AC cord into a standard AC outlet to
power the unit.
Requires one 9 volt battery (not included).
Connect a 9 volt battery to the battery leads inside of the
battery compartment on the bottom of the unit to power
the battery backup.
The battery backup is meant for short term power loss
only. The clock and alarm settings are the only settings
retained in the event of a short term power loss. The radio
and CD player will not work when the unit is powered
solely by the battery backup.
Press the POWER button to turn the clock radio on.
The Power Indicator Light will illuminate when the clock
radio is powered on.
Adjust the BUZZ/RADIO/CD switch to Radio.
Adjust the AM/FM ST. switch to the desired radio band.
Turn the TUNING dial to adjust the AM or FM radio
frequency.
Press the POWER button to turn the clock radio on.
The Power Indicator Light will illuminate when the clock
radio is powered on.
Adjust the BUZZ/RADIO/CD switch to CD.
Open the CD DOOR, load a CD into the clock radio, and
close the CD DOOR.
The CD needs to be loaded with the label-side facing up.
Press the PLAY/PAUSE button to begin playing the
loaded CD.
Play/Pause
Press to Play or Pause the CD.
Skip/Search
Press to Skip to the previous or next track.
Press and hold to rewind or fast-forward within a single
track.
Stop
Press to Stop the CD.
Repeat
Press to repeat the current track.
The Repeat Indicator Light will blink when the clock radio is
set to repeat a single track.
While set to repeat a single track, press to repeat the entire
CD.
The Repeat Indicator Light will illuminate solid when the
clock radio is set to repeat the entire CD.
Random
Press to play tracks in a random order.
Adjust the attached FM Wire Antenna to improve FM radio
reception to the clock radio.
An AM Antenna is built into the clock radio. Adjust the
position of the clock radio to improve AM radio reception.
Press the POWER button to turn the clock radio off.
The Power Indicator Light will go out when the clock radio
is powered off.
Press the AL1 or AL2 button to display the alarm 1 or
alarm 2 time.
Press and hold the AL1 or AL2 button for 3-5 seconds.
The hour on the alarm time will begin to blink.
Press the CLOCK SET buttons to adjust the alarm hour.
Press the AL1 or AL2 button.
The minute on the alarm time will begin to blink.
Press the CLOCK SET buttons to adjust the alarm minute.
Press the AL1 or AL2 button to finish setting the alarm
time.
After the alarm time is set, adjust the BUZZ/RADIO/CD
switch to the desired source.
Adjust the VOLUME dial to the desired level.
When the set and active alarm time is reached, the unit will
power on to the selected source.
Press the Power button to turn the clock radio off.
The Power Indicator Light will go out when the clock radio
is powered off.
Press and hold the AL1 button for 3-5 seconds to activate
or deactivate alarm 1.
The AL1 Indicator will illuminate when alarm 1 is activated.
Press and hold the AL2 button for 3-5 seconds to activate
or deactivate alarm 2.
The AL2 Indicator will illuminate when alarm 2 is activated.
Press the SLEEP button repeatedly until the desired
amount of time is reached.
Once the designated time expires, the clock radio will
power off.
FM
AM