Graco Alano FlipIt 1760447 User Manual

Page 71

6.1.2 5-Point Harness

1. Depress the harness adjustment button

under the seat flap

➎

. Pull the shoulder

straps out to loosen the harness.

2. Behind seat, remove the ends of the two

shoulder straps from the metal junction

plate

➏

3. From front, pull straps through the

harness slots and then reinsert them

through the appropriate slots.

4. Behind seat, push both shoulder

straps UNDER owner’s manual pocket

and out the bottom.

5. Reassemble the strap ends onto the

metal junction plate

➏

. Follow the

appropriate instructions for a smaller

or larger baby on the following page.

➏

➎

Harness adjustment button

6. SAFETY CHECK:

After the harness has been completely reinstalled,

a) CHECK that harness straps are not twisted in front or back.

b) CHECK that straps are secure by pulling on them.

This manual is related to the following products: