10 marine camera specifications, Limited warranty – Garmin GC 10 User Manual
Page 4
Garmin GC 10 Marine Camera Instructions
GC
™
10 Marine Camera
Specifications
Image Sensor Device: ⅓ in. (8.5 mm)
Sony Super HAD CCD camera
Effective Pixels: 768 × 494 (NTSC),
752 × 582 (PAL)
Scanning System: 2:1 Interlaced, 525 lines
(NTSC), 625 lines (PAL)
Sync System: Internal
Resolution: 480 TV lines
Video Output: VBS, 1.0 V peak-to-peak,
composite, 75 ohms
S/N Ratio: More than 48 dB (AGC off)
Operating Temperature: From -4°F to
140°F (from -20°C to 60°C)
Power Consumption: 80 mA at 12 Vdc
(with LED on, 120 mA, maximum)
Weight: 11.3 oz. (320 g)
Dimensions: Diameter, 2⅜ in.; Height, 2¼
in. (Diameter, 60 mm; Height, 57 mm)
Compass Safe Distance: 6⅛ in. (155 mm)
Waterproof rating: IP66
Input Voltage: 12 Vdc, ± 2V, regulated
power supply
WARNING: Do not attempt to operate
or watch video input while operating
or navigating your boat. Operating or
watching the video input while the boat
is moving could cause an accident or
collision resulting in property damage,
serious injury, or death.
Limited Warranty
This Garmin product is warranted to be free
from defects in materials or workmanship for
one year from the date of purchase. Within this
period, Garmin will, at its sole option, repair
or replace any components that fail in normal
use. Such repairs or replacement will be made
at no charge to the customer for parts or labor,
provided that the customer shall be responsible
for any transportation cost. This warranty does not
cover failures due to abuse, misuse, accident, or
unauthorized alteration or repairs.
This product is intended to be used only as a
travel aid and must not be used for any purpose
requiring precise measurement of direction,
distance, location, or topography. Garmin makes
no warranty as to the accuracy or completeness of
map data in this product.
THE WARRANTIES AND REMEDIES
CONTAINED HEREIN ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER
WARRANTIES EXPRESS, IMPLIED, OR
STATUTORY, INCLUDING ANY LIABILITY