Global Machinery Company LSM210A - Manual (Page 2)

2
Contents
Warranty Powertools
Whilst every effort is made to ensure your complete
satisfaction with this tool, occasionally, due to the mass
manufacturing techniques, a tool may not live up to our
required level of performance and you may need the
assistance of our service department.
This product is warranted for a 2-year period for home
domestic use from the date of the original purchase.
If found to be defective in materials or workmanship,
the tool or the offending faulty component will be repaired
or replaced free of charge with another of the same item.
A small freight charge may apply. Proof of purchase is
essential. We reserve the right to reject any claim where
the purchase cannot be verified.
This warranty does not include damage or defects to the
tool caused by or resulting from abuse, accidents,
alterations or commercial or business use. It also does not
cover any bonus items or included accessories. Only the
powertool is covered under this warranty.
With continuing product development, changes may have
occurred which render the product received slightly
different to that shown in this instruction manual.
Please ensure that you store your receipt in a safe place.
Conditions apply to the above warranty. For full details of
the warranty terms and conditions please refer to our
website – www.gmcompany.com
For prompt service we suggest you log your service
request online - www.gmcservice.com.au, should you
not have access to the internet, please contact our
service department on 1300 880 001 (Australia)
or 0800 445 721 (New Zealand).
Warranty 2
Introduction 3
Environmental protection 3
Description of symbols 3
Specifications 3
Safety rules for laser lights 4
General safety instructions 4
Additional safety rules for mitre saws 6
Accessories 8
Know your product 9
Unpacking 10
Transportation 10
Bench mounting 10
Release knob 10
Slide lock 10
Mitre table lock 11
Bevel lock 11
Clamp assembly 11
Spindle lock button 11
Rotating lower blade guard 11
Dust bag 11
Attaching the side bars 12
Trench depth adjustment 12
Turning on and off 12
Turning on the REDEYE ® laser line generator 12
Setting the table square with the blade 12
Setting the fence square with the table 13
Changing a blade 14
Cross-cutting (without slide action) 15
Cross-cutting (with slide action) 16
Bevel cut 16
Compound mitre cut 17
Adjusting the laser lines 17
Using the laser line generator 18
Maintenance 18
Power cord maintenance 18
Cleaning 18
General inspection 18