GE BOTTOMFREEZER 200D9366P004 - Manual (Page 21)

21
Installation Instructions
REPLACING THE FREEZER DRAWER
(on some models)
ATTACH AND SECURE THE DRAWER
FRONT TO THE SLIDES
Pull out the rail assemblies to the full length
on each side of the cabinet.
Locate the slots on the inside of the rail
assemblies near the back.
Insert the hooks at the back of the drawer
railings into the slots on the rail assemblies.
Lower the front of the drawer, making sure the
tabs on the sides of the railings fit into the front
slots in the rail assemblies.
1
A
B
D
C
REPLACE THE FREEZER BASKET
Replace the lower freezer basket by lowering it
into the frame.
2
Two people may be required to complete
this procedure. ATTACH AND SECURE THE DRAWER
FRONT TO THE SLIDES
(cont.)
Replace the screws on both rail assemblies.
1
Slot
Rail assembly
Slot
Tab
Hook
E
Screw