Garmin GDB 55 - Manual (Page 4)

MSN ® Direct Receiver Instructions
your service (1-year free service included). The product
key is required to activate your subscription.
To get the product key:
1. Connect the MSN Direct receiver to your Garmin GPS
navigator and to your vehicle’s power outlet. Turn your
vehicle key to the ON/ACC position, if necessary, to
power the Garmin GPS navigator.
2. On your Garmin GPS navigator, touch .
NOTE: Depending on the model of your Garmin
GPS navigator, the MSN Direct Menu page could be
accessible from your unit’s Menu page or Tools page.
Look for the MSN icon on your unit.
3. Write down the product key.
TIp: The yellow tag on your MSN Direct receiver
provides the product key and activation information. If
the product key on the yellow tag differs from the one on
your unit, use the product key on your unit.
To activate your subscription:
1. Go to http://garmin.msndirect.com/activate or call
(866) 658.7032 and follow the directions.
2. Within eight days, complete the following steps:
Connect the MSN Direct receiver to your vehicle
power outlet, and turn the key to ON/ACC.
Make sure you are in an MSN Direct coverage
area.
On your Garmin GPS navigator, touch . If the
Subscription Inactive page appears, verify that
at least one signal bar in the upper right corner
is green . It may take up to one hour for your
subscription to be activated. After it is activated,
the MSN Direct Menu is accessible.
•
•
•