Grandstream Networks GXV3662 - Manual (Page 4)

~
3
~ ~
4
~
L
ens
a
djustment
1. Adjust the lens VERTICALLY:
- Loosen the screws on both sides of axle.
- Adjust the lens to desired position. Allowed adjustment
range is 0 ° ~160 °.
- Tighten the screws to finish adjustment.
2. Adjust the lens HORIZONTALLY:
- Turn the lens to desired position. Allowed adjustment
range is 0 ° ~ 356 °.
1
2
I
nstaLLatIon
Cable Cable Cable Cable
S
tep 1: Take out the 3 screws on
the housing. Use the tool
comes with the package.
S
tep 2: Open the cover.
S tep 3: Attach the alighment sticker onto the surface.
S
tep 4: Drill 3 holes at the place where the mounting holes
are ( ) and hammer the 3 plastic anchors into
the holes. Then, insert the screws. Feed the
cables through the cable hole.
S tep 5: Adjust the lens (More details on page 4).
S
tep 6: Screw back to the housing.
S tep 7: Complete the installation.